In the game
Moving stone is planned as a small physics puzzle rather than a progress bar. Each pillar has a mass; each method changes the pull needed and the risk taken.
- Sledge. The default. Pull required depends on mass, slope and ground; wetting or laying timber rails under the runners lowers friction.
- Rollers. Fast on prepared, level ground, but logs jam and crush on rough rock and the load can run away downhill.
- Levers. Free a block from its bed and lift it onto the sledge in short, safe steps with packing stones.
- Ropes. Rope has a strength and a wear value; its length limits how many haulers can grip.
- Ramps. Earth and rubble ramps trade labour-days for a gentler slope.
Raising a T-pillar is the set-piece: the foot is levered toward its socket, the head is hauled up an earth ramp or timber frame, and steadying teams keep it from twisting until it is wedged. A failed lift can crack the stone or injure the crew.
The sky and orientation. A sky-watcher can plant a shadow stick (gnomon): marking where the tip of the shadow touches a circle in the morning and afternoon gives a true east–west line, and its bisector north–south. Orienting an enclosure is optional and adds ceremonial value.
Historical basis
The quarrying is well understood. On the plateau around Göbeklitepe (Göbekli Tepe), channels were cut around the desired shape with flint picks until a natural bedding plane was reached, and the piece was then probably prised out with wooden beams and wedges — that is, levers.1 The central pillars of Enclosure D are about 5.5 m high and weigh roughly 8–10 tonnes; an unfinished pillar in the quarry is about 7 m long and would have weighed around 50 tonnes. Transport distances were short, from under 100 m to about 500 m.1
For the transport itself, direct traces are absent. The excavators point to ethnographic records from Indonesia, where megaliths were hauled on wooden sledges; on Nias, 525 men are reported to have moved a stone of about 4 m³ over 3 km in three days.2 Rollers, although popular in reconstructions, have a weak evidential basis and behave badly on uneven ground.3 How the pillars were raised is not documented either. In Enclosures C and D the central pillars stand in shallow sockets on pedestals carved from the bedrock, which raises the question of what kept them upright — possibly a roof or timber structure.4
No deliberate cardinal orientation has been demonstrated for the enclosures, and the shadow-stick method, though simple and known from later antiquity, is not attested for the Neolithic. It is offered in the game as a plausible technique, not a reconstructed one.
Open questions
- Sledges, rollers or something else — will any trackway, rail timber or wear trace ever be found?
- How many people were actually needed, as opposed to how many took part?
- How were pillars raised and then kept stable in such shallow sockets?
- Were any enclosures oriented on purpose, and if so toward what?
Related
- How were the pillars moved?
- Astronomy
- Work safety
- Geology: choosing a quarry
- Architectural planning
- Was there astronomical intent?
Footnotes
-
Dietrich, O. 2016, "How did they do it? Making and moving monoliths at Göbekli Tepe", The Tepe Telegrams. ↩ ↩2
-
Schröder, E. E. W. 1917, as cited in Dietrich 2016. ↩
-
Harris, B. 2018, Oxford Journal of Archaeology 37(3). ↩
-
Kinzel, M. & Clare, L. 2020, "Monumental – compared to what? A perspective from Göbekli Tepe". ↩